Send your name, contact details and a line about the job, and our team will get back to you. To send drawings or a full specification, use the detailed quote form.
Or call (07) 3348 9444
Enter your email to get this as a PDF. It downloads straight away.
The calculator adds up the volume of the bottom, the straight shell and the top from their shapes. Cones use the included angle you enter and are worked out to a point. A 2:1 semi-ellipsoidal head is a quarter of the diameter deep. Torispherical heads use the crown and knuckle radii given in DIN 28011 (Klöpper), DIN 28013 (Korbbogen) or the ASME flanged and dished proportions.
All dimensions are inside dimensions in millimetres. Wall thickness, nozzles, manways and internal fittings are not included. Surface areas are the inside surfaces, which helps when estimating polishing, jacket coverage or cleaning.
For anything else, call (07) 3348 9444.
Total volume is the tank filled to the brim. Working volume is what you fill it to in use. The gap between them is the headspace.
Not yet. It covers vertical tanks. For a horizontal tank, call us and we will work it out with you.
Nameplates often show the working volume, not the brim-full volume, and some include or leave out the heads. Check which one you are comparing.
Yes. Every STA tank is built to order. We build up to 200–250kL in our workshop, depending on configuration, and larger tanks can be fabricated in the workshop and assembled on site on request.

Tell us what you need to store, process or move. Drawings, sketches and rough numbers are all fine.
Or call (07) 3348 9444Mon–Thu 7:00 am–3:30 pm · Fri 7:00 am–1:00 pm